1 Offers Stamos Welding Group Welding Wire | Best offers online
-31%1 
- Stamos Welding Group -
199 GBP 289 GBP
Stamos Welding Group Welding Wire - Set Of 3 - For Stainless Steels - Er 308lsi - 0.8 Mm - 3 X 5 Kg S-wmw-er 308lsi 0.8-5.0kg-set-7
Expondo.co.uk
Brand: Stamos Welding Group
EAN: 4062859216625
MPN: swmwer308lsi0.85.0kgset7
Category: Safety Workwear & Equipment
Do you want to weld stabilised and non-stabilised CrNi steels with your MIG/MAG welder? Take advantage of the welding wire made from a high-grade austenitic alloy provided by Stamos Welding Group! You'll achieve optimal results with MIG wire when working with non-corrosive steels across a wide range of applications. The welding wire for stainless steels has a diameter of 0.8 mm. Make sure it matches your wire feed in the MIG/MAG welder. Use gases of group M12 or M13 as shielding gas for CrNi steels. Due to its balanced chemical composition with low carbon content and high silicon value, you achieve optimal welds with high tensile strength. The welding wire is extremely resistant against heat and wet corrosion. Moreover, the MIG wire is cold-tough and exhibits good resistance to nitric acid. Achieve exceptional efficiency in welding, even during longer tasks, thanks to the provided quantity of 3 x 5 kg. The welding wire is ideal for MIG/MAG welding work in the chemical industry. Additionally, the austenitic MIG welding wire excels in the context of food processing and is well-suited for pipes and boiler systems. Further technical data can be found at the following link:Welding wire - for stainless steels - ER 308LSi - 0.8 mm - 5 kg
Compare prices from:
Stamos Welding Group in Safety Workwear & Equipment
EAN: 4062859216625
MPN: swmwer308lsi0.85.0kgset7
Category: Safety Workwear & Equipment
Do you want to weld stabilised and non-stabilised CrNi steels with your MIG/MAG welder? Take advantage of the welding wire made from a high-grade austenitic alloy provided by Stamos Welding Group! You'll achieve optimal results with MIG wire when working with non-corrosive steels across a wide range of applications. The welding wire for stainless steels has a diameter of 0.8 mm. Make sure it matches your wire feed in the MIG/MAG welder. Use gases of group M12 or M13 as shielding gas for CrNi steels. Due to its balanced chemical composition with low carbon content and high silicon value, you achieve optimal welds with high tensile strength. The welding wire is extremely resistant against heat and wet corrosion. Moreover, the MIG wire is cold-tough and exhibits good resistance to nitric acid. Achieve exceptional efficiency in welding, even during longer tasks, thanks to the provided quantity of 3 x 5 kg. The welding wire is ideal for MIG/MAG welding work in the chemical industry. Additionally, the austenitic MIG welding wire excels in the context of food processing and is well-suited for pipes and boiler systems. Further technical data can be found at the following link:Welding wire - for stainless steels - ER 308LSi - 0.8 mm - 5 kg
Compare prices from:
Stamos Welding Group in Safety Workwear & Equipment
